Blog #10 (Printing Week 6 - Monday) [First Diorama Props Attempt]

I made yet another mistake. I did not take the size and skinniness of my figurines into consideration when I sent them to the FabLab students for printing, and there was too much support covering the print. I also did not do a very good job in taking off the small supports. It certainly did not help that my hands are not the most delicate either.


I will try to increase the scale of the props in my diorama and try printing them again before painting anything. 

Comments

Post a Comment

Popular posts from this blog

3DP Trend Report 2023 (Review)

It is definitely interesting to see how much 3D printing has helped humanity with its various uses and abilities. 3D printing can help develop vehicle parts or recreate lost limbs and organs. I also find it intriguing how people can even make food or parts of furniture using the right polymers, filaments, and/or materials. Another fascinating detail from the report is the sheer scale of the mass production of 3D-printed parts and pieces, and how so many parts and pieces were printed in 2023. I have not looked as much into 3D printing when I was trying it out in my high school days, but now it sounds a lot bigger of a business than I thought.
Read more

Blog #3 (Printing Week 1 - Wednesday) [Second and Third Ring Attempts]

Image
On Wednesday, I tried to print some better rings will a more reasonable size, taking a chunk of the 4-hour-wide gap between my 3D Printing and Biology class times to develop them. Of course, there were some mishaps as I tried to make this next batch of rings. I accidentally made the size of the first "ring" (if you can even call it that) way too small. The ring in the second photo was torn apart as some of the filament got stuck to the nozzle while it was moving around. At least this next set of rings looks better, in my opinion. There were still some errors with the copper "Peace" ring, as the triangular part was snapped off in the process. However, the white batch of rings came out really well. They were still a bit too small, however, and the spikier rings (the ones on the right in the first and third photos here) could only fit on my pinky fingers.
Read more

Blog #2 (Printing Week 1 - Tuesday) [First Ring Attempt]

Image
I had a decent plan with my dragon ring. After learning that applying colors to objects in TinkerCAD does not matter when finally printing those objects, I tried to print the ring twice with two different printers in the lab. The rings would each be printed with different filaments: solid purple and translucent copper. The "pearl" that would be attached to the actual ring piece. However, as I was printing the rings, the sphere for the copper set was immediately being hauled to pieces in the printer. Thankfully, the purple set remained mostly intact. Unfortunately, it was two minutes into the printing process when I realized that I miscalculated the size of my ring. They could only feasibly be worn on a person's thumbs.  The image here shows my final prints. To put it briefly, one printing process was much more successful than the other.
Read more